Audi MMI   Telephone handset  Basic operation
Start screen of handset
Fig. 1 Start screen of handset
Overview of keypad
Fig. 2 Overview of keypad
Applies to vehicles: with car telephone kit and a handset for the car telephone kit
Switching on and off automatically
Make sure that the handset is properly engaged in the carrier.
Switch on the ignition. The handset is switched on automatically when the MMI is switched on. The connection to the car telephone kit is established.
Remove the ignition key. The handset is switched off automatically when the shutdown delay time has elapsed.
Switching on manually
Switch on the ignition.
Press and hold the on/off button -7- Fig. 2 until the start screen Fig. 1 appears. The handset is ready for operation as soon as a Bluetooth connection has been established.
Switching off manually
Press and hold the on/off button -7- Fig. 2 until the screen goes out.
Caution!
You must switch off the telephone system in areas where the use of mobile telephones is prohibited. Please observe all relevant caution notices and regulations.
Note
  • If you need to bond the handset again, you will find further information on Link.
  • If a valid SIM card is not detected when you switch on the handset, Please insert the SIM card will appear on the display Link.